NEW PROPOSED GSI CLASSIFICATION CHARTS FOR WEAK OR COMPLEX ROCK MASSES

PDF (English)
Publiée : Ιαν 1, 2010
DOI : https://doi.org/10.12681/bgsg.11301
P. V Marinos
Geotechnical Engineering Department, National Technical University of Athens
Résumé
The paper deals with the geotechnical classification of weak and complex rock masses. The complexity of these geological material demands a more specialized research and geological characterization due to the special features of their rock mass types regarding both their structure and their lithological characteristics. The weak and complex rock masses under consideration, often heterogeneous and containing rocks of extremely low strength, have in most cases undergone highly tectonised disturbance resulting in the destruction of their initial structure, while weathering can be another particular feature. The geotechnical types and their characterization of rock masses that can be developed in flysch, molasse, brecciated limestone, ophiolites and disturbed or weathered gneiss are studied here. In order to describe these masses in a quantitative way and provide numerical values to engineering design, new or revised rock mass classification diagrams are introduced within the general concept of the GSI system, or specific projections inside the existing GSI diagram are proposed The fundamental source for this research was data from the design and construction of 62 tunnels of Egnatia Highway appropriately assessed, processed, correlated and associated with field work.
Article Details
  • Rubrique
  • Engineering Geology and Geotechnical Engineering
Creative Commons License

Ce travail est disponible sous licence Creative Commons Attribution - Pas d’Utilisation Commerciale 4.0 International.

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution Non-Commercial License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g. post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal. Authors are permitted and encouraged to post their work online (preferably in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.

Téléchargements
Les données relatives au téléchargement ne sont pas encore disponibles.
Références
Barton, N.R., Lien, R., Lunde, J., 1974. Engineering classification of rock masses for the design of
tunnel support. Rock Mechanics, 6(4), pp. 189-239.
Bieniawski, Z.T.,1973. Engineering classification of jointed rock masses. Trans South Afr. Inst. Civ.
Eng. 15, pp. 335-344.
Brown, E.T., 1981. Rock characterization, testing and monitoring—ISRM suggested methods. Pergamon,
Oxford, pp.171-183.
Hoek, E., Marinos, P. and Benissi, M., 1998. Applicability of the Geological Strength Index (GSI)
classification for very weak and sheared rock masses. The case of the Athens Schist Formation.
Bulletin of Engineering Geology and the Environment, 57(2), pp. 151-160.
Hoek, E., Carranza-Torres, C., Corkum, B., 2002. Hoek - Brown failure criterion - 2002 edition. In:
Bawden H.R.W., Curran, J., Telesnicki, M. (eds). Proceedings of NARMS-TAC 2002, Toronto,
pp. 267-273.
Hoek, E., Marinos, P., and Marinos, V., 2004. Characterization and engineering properties of tectonically
undisturbed but lithologically varied sedimentary rock masses. International Journal of
Rock Mechanics and Mining Sciences, 42(2), pp. 277-285.
Marinos, P., Hoek, E., 2000. GSI: a geologically friendly tool for rock mass strength estimation. In:
Proceedings of the GeoEng2000 at the international conference on geotechnical and geological
engineering, Melbourne, Technomic publishers, Lancaster, pp. 1422-1446.
Marinos, P., Hoek, E., 2001. Estimating the geotechnical properties of heterogeneous rock masses such
as flysch. Bulletin of Engineering Geology and the Environment, 60, pp. 82-92.
Marinos, P., Hoek, E., Marinos, V., 2005. Variability of the engineering properties of rock masses
quantified by the geological strength index: the case of ophiolites with special emphasis on tunnelling.
Bulletin of Engineering Geology and the Environment, 65(2), pp. 129-142.
Marinos P. V. (2007). “Geotechnical classification and engineering geological behaviour of weak and
complex rock masses in tunneling”, Doctoral thesis, School of Civil Engineering, Geotechnical
Engineering Department, National Technical University of Athens (NTUA), Athens, July (in
greek).
Stille, H., Palmstroem, A., 2003. Classification as a tool in rock engineering. Tunnelling and Underground
Space Technology, 18, pp. 331-345.
Articles les plus lus par le même auteur ou la même autrice