Building an Instrument by Generating a Function


Y. Aytemiz
Abstract

Building a musical instrument requires precise calculations of the positions of its holes to obtain desired notes. To make these calculations, sound waves should be examined. Sound is a longitudinal wave and has five distinguishing aspects: amplitude, frequency, wavelength, period, and speed. A note is characterized by the frequency of the wave. In this experiment, the frequencies of notes and the speed of sound in air is used to calculate the length of a closed-end tube needed to obtain that frequency. Then, these values of lengths are used to create sound and the frequencies are measured with a tuner. The water level is changed until the desired frequency is reached. Then, a graph of length and 1/frequency is drawn to experimentally determine the slope, from which a function of length of tube is written in terms of frequency. With this equation, length required for any note can be calculated.

 
Article Details
  • Rubrik
  • Greece
Downloads
Keine Nutzungsdaten vorhanden.
Literaturhinweise
Hyperphysics.phy-astr.gsu.edu. 2020. Standing Waves. [online] Available at: <http://hyperphysics.phy-astr.gsu.edu/hbase/Waves/standw.html> [Accessed 21 September 2020].
Allaboutcircuits.com. 2020. Standing Waves And Resonance | Transmission Lines | Electronics Textbook. [online] Available at: <https://www.allaboutcircuits.com/textbook/alternating-current/chpt-14/standing-waves-and-resonance/> [Accessed 21 September 2020].
Lenhoff, A. and Robertson, D., n.d. : Keyboard Sounds That Launched Rock Music.. University of North Texas Press.
Newt.phys.unsw.edu.au. 2020. Strings, Standing Waves And Harmonics. [online] Available at: <https://newt.phys.unsw.edu.au/jw/strings.html> [Accessed 21 September 2020].