Electric Vehicle Battery Optimization With Paper Batteries


Published: Mar 23, 2021
M. Güvenilir
E. Kozanoğlu
A. Eren
S. Aytekin
Abstract
The rapidly developing study area of electric vehicles has taken a step further, especially with the new improvements in the battery systems of electric vehicles. Even though studies about this subject are still being conducted, a fully applicable solution has not yet been found. To tackle this problem, a supplementary battery pack formed by paper batteries will be implemented to assist the commonly used Li-Ion Battery(LIB) packs. In addition to this, suggestions to alter the battery cooling mechanism were explained as well. Consequently, with the use of paper batteries and the other solutions, the negative effects of ambient temperature, internal heating, and insufficient battery usage were diminished while increasing the range and efficiency of electric vehicles, and decreasing the carbon footprint.
Article Details
  • Section
  • Greece
Downloads
Download data is not yet available.
References
Alaoui, C. (2013). Solid-State Thermal Management for Lithium-Ion EV Batteries. IEEE
Transactions on Vehicular Technology, 62(1), 98–107. doi:10.1109/tvt.2012.2214246 [1]
Jaguemont, J., Boulon, L., & Dubé, Y. (2016). A comprehensive review of lithium-ion batteries
used in hybrid and electric vehicles at cold temperatures. Applied Energy, 164, 99–114.
doi:10.1016/j.apenergy.2015.11.034 [2]
Wang, Q., Jiang, B., Xue, Q. F., Sun, H. L., Li, B., Zou, H. M., & Yan, Y. Y. (2015). Experimental
investigation on EV battery cooling and heating by heat pipes. Applied Thermal Engineering, 88,
–60. doi:10.1016/j.applthermaleng.2014.09.083 [3]
Wiriyasart, S., Hommalee, C., Sirikasemsuk, S., Prurapark, R., & Naphon, P. (2020). Thermal
management system with nanofluids for electric vehicle battery cooling modules. Case Studies in
Thermal Engineering, 100583. doi:10.1016/j.csite.2020.100583 [4]
Pózna, A. I., Hangos, K. M., & Magyar, A. (2019). Temperature Dependent Parameter
Estimation of Electrical Vehicle Batteries. Energies, 12(19), 3755. doi:10.3390/en12193755 [5]
Huang, J., Shoai Naini, S., Miller, R., Rizzo, D., Sebeck, K., Shurin, S., & Wagner, J. (2019). A
Hybrid Electric Vehicle Motor Cooling System- Design, Model, and Control. IEEE Transactions on
Vehicular Technology, 1–1. doi:10.1109/tvt.2019.2902135 [6]
Ma, S., Jiang, M., Tao, P., Song, C., Wu, J., Wang, J., … Shang, W. (2018). Temperature effect
and thermal impact in lithium-ion batteries: A review. Progress in Natural Science: Materials
International. doi:10.1016/j.pnsc.2018.11.002 [7]
Mei, N., Xu, X., & Li, R. (2020). Heat Dissipation Analysis on the Liquid Cooling System Coupled
with a Flat Heat Pipe of a Lithium-Ion Battery. ACS Omega. doi:10.1021/acsomega.0c01858 [8]
OPEN SCHOOLS JOURNAL FOR OPEN SCİENCE
Chu, A., Yuan, Y., Zhu, J., Lu, X., & Zhou, C. (2020). The Design and Investigation of a Cooling
System for a High Power Ni-MH Battery Pack in Hybrid Electric Vehicles. Applied Sciences, 10(5),
doi:10.3390/app10051660 [9]
Zhao, H., Wu, Q., Hu, S., Xu, H., & Rasmussen, C. N. (2015). Review of energy storage system
for wind power integration support. Applied Energy, 137, 545–553.
doi:10.1016/j.apenergy.2014.04.103 [10]