Optimization of stretching process for improve the textural characteristics of Kashar cheese


Publiée : Jul 9, 2023
Mis à jour : 2023-07-09
Versions :
2023-07-09 (2)
M Çelebi
B Şimşek
Résumé

This study was aimed to optimize the stretching process (temperature, titration acidity, and NaCl concentration) and to determine the subsequent effects over the quality characteristics of Kashar cheese. The textural and meltability properties were studied in the optimization. Whey was used to set the acidity of stretching water. Textural, meltability, and sensory evaluation scores of matured Kashar cheese obtained from the marketplaces were used for target values ​​to optimize the stretching process. The response surface methodology was used to optimize conditions for stretching process, the arrangement of experimental design and evaluation of analysis results. The optimum conditions were found as follows: 80.20 °C for stretching temperature; 0.61 °SH for stretching water acidity; and 12.00 % for NaCl concentration. Under these conditions: 79.53 N for hardness, -292.24 g.sec for adhesiveness, 0.74 for cohesiveness, 51.20 N for gumminess, and 19.05 mm for meltability values were found in Kashar cheese that was produced for validation. The validation production results were within 95 % confidence intervals for each response obtained at optimal conditions. Thus, this model is successful to predict the textural and meltability values ​​of sample.

Article Details
  • Rubrique
  • Research Articles
Téléchargements
Les données relatives au téléchargement ne sont pas encore disponibles.
Références
AOAC(1997) Official Methods of Analysis(16th ed.). Arlington, VA: Association of Official Analytical Chemists.
Ayyash MM, Sherkat F, Shah NP(2013)Effect of partial NaCl substitution
with KCl on the texture profile, microstructure, and sensory properties of low-moisture mozzarella cheese. J Dairy Res80(1):7-13.
Bähler B, Kunz A, Hinrichs J(2016)Hot brining of pasta filata cheese:
effect of sodium and calcium chloride on composition, yield, and
hardness. Dairy Sci & Technol96(5):703-714.
Celebi M, Simsek B(2020)Taze ve olgunlaşmış kaşar peynirlerinde bazı
kimyasal ve tekstürel özelliklerin belirlenmesi. YYU FBED25(2):64-
Cetinkaya A (2012) Kaşar peynirlerinde farklı tuzlama ve muhafaza yöntemlerinin peynirin kalitesi üzerine etkisi. Atatürk Üniversitesi, Sağlık Bilimleri Enstitüsü, Doktora Tezi, Erzurum: pp 230.
ErbayZ, Nurcan K, UcuncuM(2010)Hellim peynirinin bileşimi ile renk ve
dokusal özellikleri arasındaki ilişkiler. Gıda35(5):347-353.
ErogluA, DoganM, Toker OS, Yilmaz MT(2015)Classification of kashar
cheeses based on their chemical, color and instrumental textural characteristics using principal component and hierarchical cluster analysis. Int J Food Prop18(4):909-921.
Fox PF, Uniacke-Lowe T, McSweeney PLH, O’Mahony JA (2015) Chemistry and biochemistry of cheese. In: Dairy Chemistry and Biochemistry. 2nd ed, Springer Cham., New york: pp 499-546.
Goncalves MC, Cardarelli HR(2020)Effect of the stretching temperature
on the texture and thermophysical properties of Mozzarella cheese. J
Food Process Preserv44(9):e14703.
Hayaloglu AA, Deegan KC, McSweeneyPL(2010)Effect of milk pasteurization and curd scalding temperature on proteolysis in Malatya, a
halloumi-type cheese. Dairy Sci Technol90(1):99-109.
HayalogluAA, Karatekin B, Gurkan H(2014)Thermal stability of chymosin or microbial coagulant in the manufacture of Malatya, a Halloumi
type cheese: Proteolysis, microstructure and functional properties. Int
Dairy J38(2):136-144.
Kahyaoglu T, Kaya S, Kaya A (2005) Effects of fat reduction and curd
dipping temperature on viscoelasticity, texture and appearance of Gaziantep cheese. Food Sci Technol Int11(3):191-198.
Kaminarides S, Parsschopoulos N, Beri I(1999) Combined effects of concentrated thermophilic and mesophilic cultures and conditions of curd
acidifications on the manufacture and quality of kasseri cheese. Int J
Dairy Technol52(1):11-19.
Kavak DD, Karabiyik H(2019)Quality evaluation of kashar cheese: influence of palm oil and ripening period. Food Sci Technol40:354-360.
Kaya S (2002)Effect of salt on hardness and whiteness of Gaziantep cheese during short-term brining. J Food Eng52(2):155-159.
KocaN, Metin M(2004)Textural, melting and sensory properties of lowfat fresh kosher cheeses produced by using fat replacers. Int Dairy
J14(4):365-373.
Maldonado R, Melendez B, Arispe I, Boeneke C, Torrico D, PrinyawiwatkulW(2013)Effect of pH on technological parameters and physicochemical and texture characteristics of the pasta filata cheese Telita. J
Dairy Sci96(12):7414-7426.
Marshall RT(1992) In Standard methods for the examination of dairy products.American Public Health Association, Washington DC: pp 13-46
Pastorino AJ, Hansen CL, McMahon DJ(2003) Effect of salt on structure-function relationships of cheese. J Dairy Sci86(1):60-69.
Say D, Guzeler N(2008)Taze kaşar peynirlerinin randıman, bileşim veduyusal özellikleri üzerine haşlama suyunun tuz konsantrasyonunun
etkisi. Çukurova Ün Fen Bil Ens19(3):30-41.
Topcu A, Bulat T, Ozer B(2020)Process design for processed Kashar cheese (a pasta-filata cheese) by means of microbial transglutaminase: Effect on physical properties, yield and proteolysis. LWT125:e109226.
TunickMH, Malin EL, Smith PW, Shieh JJ, Sullivan BC, Mackey KL,
Holsinger VH(1993)Proteolysis and rheology of low fat and full
fat Mozzarella cheeses prepared from homogenized milk. J Dairy
Sci76(12):3621-3628.
UcuncuM (2013)Süt ve Mamulleri Teknolojisi. Meta Basım, İzmir.
Yasar K, Guzeler N (2011) Effects of coagulant type on the physicochemical and organoleptic properties of Kashar cheese. Int. J. Dairy
Technol. 64(3): 372-379