MINERALOGICAL AND CHEMICAL COMPOSITION OF CFB FLY ASH DERIVED FROM CO-COMBUSTION OF XYLITE AND BIOMASS


Published: Jan 1, 2007
Keywords:
CFB fly ash bituminous coal xylite/subbituminous coal wood chips
N. Koukouzas
J. Hämäläinen
D. Papanikolaou
A. Tourunen
T. Jäntti
Abstract

The chemical and mineralogical composition of fly ash samples collected from different parts of two Circulating Fluidised Bed (CFB) facilities has been investigated. The fuels used, were Greek xylite/suhbituminous coal (from the Fiorina basin), Polish coal (from the Catowice region - Poland) and wood chips (Swedish conifer). The characterisation of the fly ash samples included chemical analyses, particle size distribution and X-ray diffraction. According to the chemical analyses the produced fly ashes are rich in CaO. Moreover, S1O2 is the dominant oxide in fly ash with Al203 and Fe2Oi found in considerable quantities. Finally, results obtained by XRD showed that the major mineral phase of fly ash is quartz, while other mineral phases that are occurred are maghemite, hematite, periclase, rutile, gehlenite and anhydrite, while the aforementioned mineral phases were identified by scanning electron microscope (SEM).

Article Details
  • Section
  • Mineralogy-Petrology-Geochemistry-Economic Geology
Downloads
Download data is not yet available.
References
ASTM, 1996. In Annual book of ASTM standards, vol. 4.02: Concrete and aggregates. Philadelphia, PA: American Society for Testing and Materials, 293.
Baba, A, and Usmen, Μ. Α., 2006. Effects of fly ash from coal-burning electrical utilities on ecosystem and utilization of fly ash. In A. Baba, K.W. Howard and O. Gunduz (eds), Groundwater and Ecosystems, IV. Earth and Environmental Sciences, vol. 70 15-31 pp.,NATO Science Series.
Brown, CR., and Dykstra, J., 1995. Systematic errors in the use of loss-on-ignition to measure unburned carbon in fly ash, Fuel, 74, 570-574.
Foner, H.A., Robl, T.L., Hower, J.C., and Graham, U.M., 1999. Characterization of fly ash from Israel with reference to its possible utilization, Fuel, 78, 215-223.
Georgakopoulos, Α., Filippidis, Α., Kassoli-Fournaraki, Α., Iodanidis, Α., Fernândez-Turiel, J.L., Llorens, J.F., and Gimeno, D., 2002a. Environmentally important elements in fly ashes and their leachates of the Power Stations of Greece, Energy Sources, 24(1), 83-91.
Georgakopoulos, Α., Filippidis, Α., Kassoli-Fournaraki, Α., Fernândez-Turiel, J.L., Llorens, J.F., and Mousty, F., 2002b. Leachability of major and trace elements of fly ash from Ptolemais Power Station, Northern Greece, Energy Sources, 24(2), 103-113.
Goodarzi, F., 2006. Morphology and chemistry of fine particles emitted from a Canadian coalfired power plant, Fuel, 85, 273-280.
Gutierrez, B., Pazos, C, and Coca, J., 1993. Characterization and leaching of coal fly ash, 1993, Waste Management & Research, 11, 279-286.
Jankowski, J., Ward, C.R., and French, D., 2005. The Heavy Metal Leaching Behaviour of Australian Fly Ashes, submitted for consideration in the 2005 World of Coal Ash, Lexington, Kentucky USA.
Liu, G., Zhang, H., Gao, L., Zheng, L., and Peng, Z., 2004, Petrological and mineralogical characterizations and chemical composition of coal ashes from power plants in Yanzhou mining district, China, Fuel Processing Technology, 85, 1635-1646.
Martinez-Tarazona, M.R., and Spears, D.A., 1996. The fate of trace elements and bulk minerals in pulverized coal combustion in a power station, Fuel Process Technol, 47, 79-92.
Steenari, B.M., and Lindqvist, O., 1999. Fly ash characteristics in co-combustion of wood with coal, oil or peat, Fuel, 78, 479-488.
Strock, N.G., and Stehouwer, R.C., 2004. Soil additives and soil amendments. Chapter 10, In W.B. White (ed.) Coal ash beneficial use in mine reclamation and mine drainage remediation in Pennsylvania, Harrisburg, PA, 302-315pp.
Most read articles by the same author(s)