LABORATORY INVESTIGATION ON THE CORRELATION BETWEEN THE FRICTION ANGLE OF ROCK JOINTS AND THE CONSTANT MI OF THE HOEK AND BROWN CRITERION


Publiée : Ιουλ 27, 2016
A. Tsikrikis
T. Papaliangas
V. Marinos
Résumé

A correlation between the non-dilational friction angle (φm) of rock discontinuities and the constant mi of the Hoek and Brown criterion for intact rock is investigated, using the results of a focus oriented laboratory program. The program consisted of two types of laboratory tests: a series of triaxial compression tests on intact rock samples for the determination of the constant mi and an independent series of direct shear tests on tensile fractures of the same rock types for the determination of the rock joint friction angle φm. Four typical rock types from Northern Greece were used: a granite, a sandstone, a limestone and a marble, covering a range of mi between 8 and 34, and an unconfined compressive strength between 60 and 120 MPa. Apart from the certain range of parameters that is presented for this specific rocks, the experimental results show that the non-dilational friction angle of the rock fracture determined by direct shear testing (φm) decreases logarithmically with the value of the constant mi.

Article Details
  • Rubrique
  • Engineering Geology, Hydrogeology, Urban Geology
Téléchargements
Les données relatives au téléchargement ne sont pas encore disponibles.
Références
ASTM D7012-14Α, 2014. Standard Test Methods for Compressive Strength and Elastic Moduli of
Intact Rock Core Specimens under Varying States of Stress and Temperatures, ASTM
International, West Conshohocken, PA.
Barton, N., 1971. A Relationship Between Joint Roughness and Joint Shear Strength, Proc. ISRM
Symp.on Rock Fracture, Nancy, France, Pap. I-8.
Barton, N., 1976. The Shear Strength of Rock and Rock Joints, Int. J.Rock Mech. Min. Sci. and
Geomech., 13, 255-279, Pergamon Press.
Hoek, E., 1983. Strength of jointed rock masses, 23rd Rankine Lecture, Géotechnique, 33(3), 187-223.
Hoek, E. and Brown, E.T., 1997. Practical estimates of rock mass strength, International Journal of
Rock Mechanics and Mining Sciences, 34 (8), 1165-1186.
Hoek, E. and Brown, E.T., 1980. Empirical strength criterion for rock masses, J Geotech Eng Div
ASCE, 106(GT9), 1013-1035.
Hoek, E., Carranza-Torres, C. and Corkum, B., 2002. Hoek-Brown criterion - 2002 edition. In:
Proceeding of the NARMS-TAC Conference, Toronto, 1, 267-273.
Hoek, E., Wood, D. and Shah, S., 1992. A modified Hoek-Brown failure criterion for jointed rock
masses, ISRM Symposium on Rock Characterization, Chester, UK.
Hencher, S.R. and Richards, L.R., 1989. Laboratory direct shear testing on rock discontinuities,
Ground Engng, 22, 24-31.
Hencher, S. and Richards, L., 2014. Assessing the shear strength of rock discontinuities at laboratory
and field scales, Rock Mechanics and Rock Engineering, 48, 883-905.
Horn, H.M. and Deere, D.U., 1962. Frictional characteristics of minerals, Géotechnique, 12, 319-35.
ISRM, 2014. Suggested Method for Laboratory Determination of the Shear Strength of Rock Joints:
Revised Version, Rock Mechanics and Rock Engineering, 47(1), 291-302.
Papaliangas, T.T., Hencher, S.R. and Lumsden, A.C., 1995. A comprehensive peak shear strength
criterion for rock joints. In: Fuji, T., ed., Proc. 8th Int. Congress ISRM, Tokyo, 1, 359-366,
Rotterdam, Balkema.
Papaliangas, T.T., Lumsden, A.C. and Hencher, S.R., 1996. Prediction of in situ peak shear strength
of rock joints. In: Barla, G., ed., EUROCK’ 96. Prediction and Performance in Rock
Mechanics and Rock Engineering, Proc. ISRM Symposium, Torino, 2-5 September.
Rotterdam, Balkema.
Papaliangas, T.T., Lumsden, A.C. and Manolopoulou, S., 1997. Rock slides and assessment of insitu
joint shear strength. In: Marinos, P., et al., eds., Engineering Geology and the
Environment, Proc. Intern. Symp., Athens, 23-27 June 1997, Vol. 1. Rotterdam, Balkema.
Articles les plus lus par le même auteur ou la même autrice