Characterization of a new laboratory ceramic product from industrial by-products as raw materials and caustic magnesia as additive
Résumé
A new ceramic product is introduced by mixing caustic magnesia, produced in the laboratory from pure, high quality magnesite, and natural silt. Bottom ash and red mud, two well known environmentally hazardous industrial by-products, were also added in the mixture. After testing various recipes we concluded that addition of 5% caustic magnesia in the ceramic product greatly enhances its performance. Increase bonding of the ceramic microstructure is attributed to the formation of periclase necks, the concurrent formation of small quantities of amorphous material and the homogeneously distributed pores during the experimental firing of the mixture. Combined X-ray Diffractometry and Scanning Electron Microscopy of the ceramic product revealed the occurrence of unreactive phases, inherited by the raw materials, as well as newly-formed albite and magnesioferrite. Our results show that utilization of by-products may be important and environmental friendly materials in producing low cost ceramic building materials.
Article Details
- Comment citer
-
Skliros, V., Lampropoulou, P. G., Tsikouras, B., Hatzipanagiotou, K., Christogerou, A., & Angelopoulos, G. N. (2013). Characterization of a new laboratory ceramic product from industrial by-products as raw materials and caustic magnesia as additive. Bulletin of the Geological Society of Greece, 47(4), 2050–2058. https://doi.org/10.12681/bgsg.11089
- Rubrique
- Industrial Minerals and Rocks
Ce travail est disponible sous licence Creative Commons Attribution - Pas d’Utilisation Commerciale 4.0 International.
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution Non-Commercial License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g. post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal. Authors are permitted and encouraged to post their work online (preferably in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
